Kemscreed Two-pack, fast drying, Waterproofing membrane Description A two-pack liquid polymer and cement waterproofing compound and protective slurry with moderate flexibility to accommodate fine cracks and concrete shrinkage cracks for use internally and externally.

FASTFLEXX High flexibility acrylic polymer with microfiber reinforcement waterproofing membrane. Description FastFlexx is a two pack cement/acrylic polymer waterproofing membrane, with high flexibility, and microfibre reinforcement. It is formulated for FAST SETTING, and adhesion to a wide range of building substrates.

Kemcote matt/gloss A clear matt or gloss coating for porous surfaces and slate Description A clear matt/gloss non-yellowing, hard-wearing, solvent based coating that highlights colour, seals and protects porous surfaces and slate.

Natural sealer Clear sealer that doesn’t change the appearance Description Replaces water in kemgrip standard and mortar mixes to make an adhesive that has flexibility, high strength, improved bond strength and is chemical, vibration and shock resistant.

CLEAR SEALER

Level floor standard Durable self levelling underlay for ceramic tiles and timber floors. Description A resin modified, fast setting cement based compound for use as an underlay and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish.

LEVELLING

Driveway Stain A decorative concrete treatment Description A chlorinated rubber solvent based stain for concrete and brick substrates. Corrects natural imperfections and stains with uniform colour without disturbing the natural texture of the substrate.

Elastakote Flexible acrylic waterproofing coating Description A premixed one-pack heavy duty elastic water based acrylic coating that is easily applied to form a resilient barrier over concrete and masonry roofs and walls. Elastakote will waterproof the substrate and protect it from weather and atmospheric degradation. Will remain elastic and will bridge and seal hairline cracks.

Epeshield Chemical and wear resistant coating Description A water based solvent free two- pack epoxy coating which hardens to a tough porcelainic or ceramic like finish. Designed as an impervious finish providing excellent chemical resistance. It can be applied over concrete, masonry and steel substrates for both interior and exterior use (will chalk externally).

COATING

PrimeDamp Multi-purpose, water based, epoxy moisture barrier Description A multi-purpose, water based, three-pack epoxy resin. PrimeDamp has excellent adhesion to most correctly prepared building surfaces such as brick, block, concrete and masonry.

Shower Fix Waterproofs tiled areas without removing tiles Description A siloxane/solvent based material that penetrates deep into the grout and porous tiles, forming a water- repellent barrier. Is not a coating, coatings fail if chipped or scratched and wear due to ordinary cleaning. Coatings need to be reapplied constantly and once damaged are next to useless.

DAMP PROOFING

Colour Seal A tough flexible siliconised water resistant sealant Description A tough, siliconised, flexible, durable water based sealant that is easily applied and pointed.

SEALANT

Kemclean Tile, brick, stone and concrete cleaner Description A powerful phosphoric acid based cleaner for removing soap scum, mould and mildew, cement, latex resin contaminants from tile, grout, concrete, brick, stone, slate and masonry surfaces.

MAINTENANCE PRODUCT

SureBond A30 High Polymer Bonding Agent Description SureBond A30 is an acrylic polymer emulsion which replaces water for mixing with SureGrip T33 adhesive. It is formulated to improve the flexibility, and bond strength when fixing ceramic, porcelain, homogeneous or stone tiles.

SureBond A20 High Shear Tensile & Bond Strength Description SureBond A20 is an acrylic polymer emulsion which replaces water for mixing with SureGrip T22 adhesive. It is formulated to improve the flexibility, and bond strength when fixing ceramic tiles and enables fixing of stone tiles.

Primebond Primer - for porous masonry surfacesgrout additive - improves flexural strength, mould resistance and reduces stain Description Primer - an acrylic based liquid used to prime porous surfaces. Use on porous concrete, cement render, fibre cement and gypsum building boards.

SureBond A50 Multipurpose Acrylic Liquid Based Admixture. Description SureBond A50 is an acrylic polymer emulsion which can be used as a tile additive & primer. It is formulated to improve the flexibility, and bond strength when fixing ceramic, porcelain, homogeneous or stone tiles.

PRIMER / ADDITIVE

SureGrip T33

Non-Sag polymer cement based tile adhesive. Description SureGrip T33 is an internal / external cement based adhesive formulated for use as a thick or thin bed adhesive for bedding and fixing ceramic and stone tiles including in swimming pools.

SureGrip T55 Polymer modified water resistant tile adhesive. Description Suregrip T55 is an internal / external polymer modified cement based C2S1 TE adhesive. It is formulated for use as a thick or thin bed adhesive for bedding and fixing ceramic, porcelain and stone tiles without the use of other additives.

Tilemastic Premium white premixed non-slip flexible wall adhesive Description A premium, white premixed, water resistant, flexible wall tile adhesive with excellent non-slip properties and bond strength.

TILES ADHESIVE

SureGrip T22 Cement based tile adhesive. Description SureGrip T22 is an internal / external cement based adhesive formulated for use as a thick bed adhesive for bedding and fixing ceramic tiles.

Driseal 107 waterproofing slurry Description A two-pack liquid polymer and cement waterproofing compound and protective slurry with moderate flexibility to accommodate fine cracks and concrete shrinkage cracks for use internally and externally.

Stocrete CCW Elastic Two-components flexible cementitious waterproofing membrane Description • Damp rooms, shafts, tanks, sinks • Fresh water reservoirs • Bathrooms, kitchens • Swimming pools, fountains • Planter boxes and gutters • Basement walls • Water retaining structures • Aa secondary membrane for re- roofing work

StoBit TMW APP modified bitumen torch-on waterproofing membrane with non- woven polyester reinforcement Description • For roofing and re-roofing works for sloped and flat-protected roofs • Waterproofing of both above and below grade structures • Suitable for waterproofing exposed surfaces

StoBit Seal 20 Rubberised bitumen emulsion Description StoBit Seal 20 is cold-applied rubberised bitumen for use as a damp proof membrane in sandwich construction, as a general purpose waterproofer effective bonding agent for insulation boards, expanded polystyrene, cork panels, etc.

Stopur 66 Elastic Water-based, liquid applied, PUR waterproofing membrane Description • Floor slabs • Patios, terraces and balconies • RC gutters and planter boxes • Basement • Retaining walls • Metal roof • Can be used as an exposed system when reinforced with StoDivers GF Net

ARDEX WPM 422 Crystalline Admix Solution Description ARDEX WPM 422 is added to the concrete mix at the time of batching. It is consists of Portland cement,very fine treated silica sand and various active proprietary chemicals. These active chemicals react with the moisture in fresh concrete and the by- products of cement hydration to cause a catalytic reaction, which generates a non- soluble crystalline formation throughout the pores and capillary tracts of the concrete.

Acrybond A primer for masonry surfaces and bonding additive to cement based mixtures Description A multi-purpose, acrylic primer/bonding/waterproofing agent for concrete, screeds, renders and cement based premixes to masonry building surfaces.

StoJet J Thane Flex Flexible polyurethane injection resin • Description Injection of cracks in structure subject to further movement • Filling of dry, damp or wet cracks in concrete, stone or masonry • Durable sealing of waterbearing cracks in concrete • Elastic sealing and filling of fine cracks, honeycomb voids, etc

StoJet IHL Two-components, solvent free, low viscosity epoxy injection resin Description • Structural repair of cracked concrete by injection • Repair and filling of small hairline cracks in reinforced concrete structures • Injection of construction joint on pre-stressed concrete members at tendon couplings • Consolidation of friable and porous stones • Designed for use in higher temperature and slower-curing injection requirement • Primer for solvent free coating / topping where dampness occur • Steel-plate bonding

StoPox EPA P Two-components, solvent-free, epoxy resin adhesive Description • Used in narrow load-bearing gaps such as between pre-cast concrete elements in bridge construction and steel plates to concrete in external steel reinforcement repair • Used to bond bolts and starter bars placed in horizontal position • As a surface sealer prior to crack injection • As a patching compound for small potholesetc

StoPox EPA P3 (Fast Set) homeProduct guide SearchCategory overviewProducts from A-Z Solvent-free, epoxy resin fine fill repair mortar Description • For repairing thin sections of concrete, minor honeycombs and blowholes • Used in pre-cast yards to make good minor defects in pre-cast elements which require a homogeneous bond with the host concrete • Used for on site repairs to fair faced concrete where a smooth hard finish is required • As a surface sealer prior to crack injection

Flexible Sealer One-pack waterproofing membrane applied prior to tiling bathrooms & balconies or left exposed on roofs & balconies Description A premixed one-pack, water based, brush/roller applied, acrylic membrane, which when cured becomes a tough elastic heavy duty UV resistance waterproof membrane. The cured membrane will remain elastic and can bridge and seal hair- line cracks and can resist mild chemical attack. Internal wet areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regulations.

Reinforced Render A glass fibre reinforced high performance waterproof render Description A cement and fibre aggregate premix containing alkali resistant glass fibres and waterproofing additives making the product suitable for use as a high performance render. The addition of the alkali resistant glass fibres makes a rendering mix with greatly enhanced performance compared with conventional mortar without fibre.

StoSeal SPS A One-component, polyurethane- based elastic sealant Description • As a construction sealant on wood, aluminium, most lacquered metals, polyester, glass, PVC, concrete, terra cotta, stone, ceramic tiles, stoneware and etc • For filling vertical and horizontal expansion joints

Sealflex A hybrid polymer superior to silicone and polyurethane that is easier to apply and finish Description • A hybrid polymer technology that combines the advantages of polyurethane and silicone technologies and is free from isocyanates • Can be used as an adhesive, sealant and gapfiller

ARDEX RA 56 Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair Description ARDEX RA 56 is an ultra-low viscosity, 2-component hybrid polyurethane adhesive. It is a rapid curing concrete repair material used when minimal down time is crucial. Its low viscosity offers deep penetration into hairline cracks for a structural repair. The addition of dry, bagged aggregate makes a quality spall repair product that is ready for grinding and open to traffic in less than 1 hour.

ARDEX RA 54 Fast Setting Semi-Rigid Polyurea Joint Sealant Description ARDEX RA 54 is used to fill interior control joints or new construction saw joints on horizontal concrete surfaces. Designed for industrial floor applications receiving heavy duty vehicle traffic. Can be used in exterior applications, when minimal (10% to 12%) joint movement from thermal cycling will occur. With a very rapid cure time, repaired joints can be opened to traffic in 90 minutes.

ARDEX CA 20 P Multipurpose Construction Adhesive and Sealant Description ARDEX CA 20 P has high initial tack with high bond strength that adheres virtually every building material. Works on dry or wet surfaces and even underwater.

StoCryl SCC Standard polymeric curing membrane Description Suitable for curing large areas of concrete construction such as runways, industrial concrete floors, motorways, bridgeworks, literally all exposed cement based surfaces.

CONCRETE RESTORATION

StoCrete NSG High performance, pumpable non-shrink grout Description • To provide heavy duty support beneath load bearing units • Concrete repairs and pressure grouting

StoPox EPG Three-components, solvent-free, epoxy resin grout Description • Bridge bearing pads • High-speed turbines and centrifuges • Support beneath crane and transport rails • Load bearing joints between pre-fabricated elements • Wide cracks in horizontal concrete surfaces • Structural filling of holes and cavities in concrete • As an anchoring grout to anchor bolts, masts and reinforcement bar

StoCrete Plug Rapid-setting cementitious waterplug Description For patching, joint filling, caulking and pointing of concrete pipes, tunnels, tanks, elevator pits, sewage systems, well foundations, mines

GROUTS

Non-Shrink Grout Expanding grout Description A premixed, non-shrink class A cement grout. An expanding non-ferrous grout consisting of a dry, premixed blend of Portland cement and graded, siliceous aggregate with set regulating and reactive chemical agents. Contains no calcium chloride.

TILE GROUTS

Kemgrout Flexible Waterproof tile grout - mould and fungi resistant Description A dense, smooth, hard wearing, flexible polymer modified Portland cement floor and wall grouting compound with resistance to mould and fungi growth for joints up to 5mm wide.

Epegrout Water washable epoxy grout Description A three component water washable, chemical resistant epoxy tile grout for joints up to 10mm. Available in two grades, Epegrout Smooth and Epegrout Trade. Epegrout is for use by experienced tradespeople only.

Kemgrout Sanded Fine-finish waterproof tile grout – chemical & acid resistant Description A fine-finish dense hard-wearing waterproof Portland cement, floor and wall grouting compound with resistance to mild chemical and acid attack for joints 2mm to 10mm wide.

Flexible sealer

One-pack waterproofing membrane applied prior to tiling bathrooms & balconies or left exposed on roofs & balconies Description A premixed one-pack, water based. The cured membrane will remain elastic and can bridge and seal hair-line cracks and can resist mild chemical attack.

Liquid flash 1

Microfibre reinforced waterproofing membrane Description A premixed one-pack, grey, water based, microfibre reinforced acrylic flexible waterproofing membrane that is easily applied with a brush to form a resilient waterproof/flashing membrane between different building surfaces

WATERPROOFING

WATER PROOFING AND CONSTRUCTION CHEMICALS

StoCrete CNP Two-components cementitious primer for steel reinforcement Description • Used to protect reinforcement steel in spalled or honeycombed concrete from further corrosion. • Used to protect exposed reinforcement steel during construction works when casting is delayed.

MISCELLANEOUS

Features • Easy to apply - does not require mixing, application equipment washes clean in water • Fully flexible coating that will accommodate extremes in movement • Excellent UV light resistance • Hygienic coating that can be used in direct contact with food and drinking water • Excellent adhesion to most common building materials after correct surface preparation • Bridges and seals hair-line cracks • Can be overpainted with water based paints to match surroundings • White in colour

Properties • High compressive, flexural and tensile strength • Good flow properties • Shrink-free curing to ensure effective contact and support • Good chemical resistance • Takes up and transfers tensile and compressive loads • Good impact resistance • Ready-to-use pre-weighted packs Delivery form: 20 kg set Approx. yield: 0.01 m3 per 20 kg of StoPox EPG

StoCrete SAM 550 Self-levelling, cementitious underlayment Description • Levelling cement-based floors • Ideal for use below tiles, carpet and rubber matting

Features • Reduced liability to cracking and greater resistance to water penetration gives Reinforced Render a high degree of impermeability compared to ordinary renders. • Due to the mix formulation and the reinforcing fibre, Reinforced Render adheres strongly to clean substrates and the resistance of the hardened render to abrasion and impact is excellent. • Fire resistance - not combustible

StoCrete PCR One-component, polymer modified standard structural repair mortar Description • For horizontal, vertical and overhead patching of spalled concrete • To repair concrete in accordance with the Sto REPAIR SYSTEMS

CLASS:

C2 E

CLASS:

C2 TE

CLASS:

SureGrip T33

Flexible sealer

Liquid flash 1

Flexble

sealer

C2 E

C2S1 TE